RTM

In combination with cobalt accelerated resins, Andonox SHP-10 has shown to be an exceptionally good cure system for unsaturated polyesters both at ambient and elevated temperatures. (See Technical Data Sheet)

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

Norox 771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

ANDONOX KP-LE is a methyl ethyl ketone peroxide (MEKP) with higher content of free hydrogen peroxide (H2O2) to provide shorter gel time then the ANDONOX KP-9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

It is an effective medium temperature initiator for the polymerization and/or crosslinking of numerous monomers and resins, including unsaturated polyester and vinyl ester resins.

Norox P-20 is an efficient moderate to high temperature initiator for the polymerization of monomers and resins with vinyl unsaturation.

NOROX MEKP-9H is a methyl ethyl ketone peroxide which features a reduced level of hydrogen peroxide compared to Andonox KP - 9 and gives a longer gel time when workshop and resin temperatures increase during warm weather.

Norox MEKP-925 has a high MEKP dimer content that gives excellent performance in most vinyl ester resins.

Norox MEKP-900 is a specially formulated methyl ethyl ketone peroxide (MEKP) composition for the room temperature cure of unsaturated polyester resins.