Paints and Coatings

Benox® L - 40LV: Benzoyl Peroxide (BPO)

Chemical Name: 
dibenzoyl peroxide
CAS Numbers: 
94-36-0

BENOX® L - 40LV is a low viscosity, sprayable dispersion of dibenzoyl peroxide (BPO).

Application Details: 

BENOX® L - 40LV is a dibenzoyl peroxide (BPO) specifically designed for use in “curing” unsaturated polyester and vinyl ester resins and can also be used as a polymerization initiator for vinyl monomers, (e.g. styrene, acrylate, etc.).

Andonox® SG - 10

Chemical Name: 
methyl ethyl ketone peroxide
CAS Numbers: 
1338-23-4

ANDONOX SG - 10 is a methyl ethyl ketone peroxide (MEKP) in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Application Details: 

ANDONOX SG-10 is a methyl ethyl ketone peroxide (MEKP) with high active oxygen and hydrogen peroxide level to provide faster gel and cure times. It is suitable for production of button sheets, continuous laminating, centrifugal casting and polyester concrete. (Due to the high hydrogen peroxide level, it is not recommended for use with gelcoats.)

Active Oxygen Content: 9.6 - 9.8 %
Physical Appearance: Colorless and clear liquid
Soluble In: Oxygenated organic solvents
Insoluble In: Water
Storage Temperature: Min 0°C, max 25°C

Andonox® MEC

Chemical Name: 
peroxide mixtures

ANDONOX MEC is a colourless solution of methyl ethyl ketone peroxide and cyclohexanone peroxide in phlegmatiser.

Application Details: 

ANDONOX MEC provides excellent cure performance in low and average temperature conditions when used as an initiator with gelcoats & unsaturated polyester resins.

Active Oxygen Content: 9.6 - 9.8%
Physical Appearance: Colorless and clear liquid
Soluble In: Oxygenated organic solvents
Insoluble In: Water
Storage Temperature: Max 25°C

Andonox® KP - 9S

Chemical Name: 
methyl ethyl ketone peroxide
CAS Numbers: 
1338-23-4

ANDONOX KP - 9S is a methyl ethyl ketone peroxide (MEKP) in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Application Details: 

ANDONOX KP-9S is a MEKP with a higher content of free hydrogen peroxide than to provide shorter gel time than ANDONOX KP - 9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

Active Oxygen Content: 9.0 - 9.2 %
Physical Appearance: Colorless and clear liquid
Soluble In: Oxygenated organic solvents
Insoluble In: Water
Storage Temperature: Max 25°C

Andonox® ENP - 80

Chemical Name: 
methyl ethyl ketone peroxide
CAS Numbers: 
1338-23-4

ANDONOX ENP  -80 is a medium active methyl ethyl ketone peroxide (MEKP) in proprietary phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerator.

Application Details: 

ANDONOX ENP-80 is a phthalate free methyl ethyl ketone peroxide (MEKP) which gives consistent room temperature performance with unsaturated polyester resins.

Andonox® ENP - 90

Chemical Name: 
methyl ethyl ketone peroxide
CAS Numbers: 
1338-23-4

ANDONOX ENP - 90 is a medium active methyl ethyl ketone peroxide (MEKP) in proprietary phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerator.

Application Details: 

ANDONOX ENP-90 is a phthalate free methyl ethyl ketone peroxide (MEKP) suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

MAXGARD® DPA-8: UV Stabilizer Octocrylene

Chemical Name: 
Octocrylene (liquid)
CAS Numbers: 
6197-30-4

MAXGARD DPA-8 (Octocrylene) is a liquid ultraviolet light (UV) stabilizer which protects plastics and coatings from damaging UV radiation found in sunlight.

Application Details: 

MAXGARD DPA-8 (octocrylene) is a 100% active liquid ultraviolet light (UV) stabilizer with low color, extremely low volatility and that does not react with other additives or pigments. Compatible with all major PVC plasticizers and easily incorporated into liquid systems, DPA-8 (octocrylene) is used to stabilize plastics (like PVC plastisols, plasticized PVC and liquid color formulations), coatings (including polyester gel-coats and inks) and adhesives from the harmful effects of ultraviolet light (UV).

Empirical Formula: C<sub>24</sub>H<sub>27</sub>O<sub>2</sub>N
Physical Appearance: Clear, light amber, viscous liquid
Mass Density: 1.05g/cm<sup>3</sup> at 25°C
Boiling Point: 218°C at 2 mbar
Solubility in Water: Immiscible

MAXGARD® DPA-2: UV Stabilizer Etocrylene

Chemical Name: 
Etocrylene
CAS Numbers: 
5232-99-5

MAXGARD DPA-2 (etocrylene) is an ultraviolet light (UV) stabilizer which protects plastics and coatings from ultraviolet (UV) radiation found in sunlight.

Application Details: 

MAXGARD DPA-2 (etocrylene) is an ultraviolet light (UV) stabilizer which is extremely useful in thermoplastic resins due to its excellent ultraviolet light (UV) protection and good heat stability. It also contributes less color than many other ultraviolet light (UV) stabilizers in plastics, coatings and adhesives.

Empirical Formula: C<sub>16</sub>H<sub>15</sub>O<sub>2</sub>N
Physical Appearance: White Powder
Mass Density: 1.16g/cm<sup>3</sup> at 25°C
Melting Point: 93°C
Solubility in Water: Nil

MAXGARD® 1000: UV Absorber Benzophenone-2

Chemical Name: 
Benzophenone - 2
CAS Numbers: 
131-55-5

MAXGARD 1000 (benzophenone-2) is an effective ultraviolet light absorber (UV absorber) which acts as a stabilizer for protecting plastics, coatings and cosmetics from ultraviolet light (UV) radiation damage found in sunlight.


 

Application Details: 

MAXGARD 1000 (benzophenone-2) is very compatible with plastic optical lens materials and highly effective as an ultraviolet light absorber (UV screen) for these products. It also provides improved stability in cosmetics and perfumes and improves colors in various applications. MAXGARD 1000 has a very broad ultraviolet light (UV) absorption band which extends into the UV-A range.

Physical Form: Light Yellow Powder
Melting Range: 195 - 197 C

MAXGARD® 700: UV Stabilizer Benzophenone-12

Chemical Name: 
benzophenone-12
CAS Numbers: 
1843-05-6

MAXGARD 700 (benzophenone-12) is an excellent ultraviolet light (UV) stabilizer for protecting plastics from natural ultraviolet (UV) radiation in sunlight.

Application Details: 

MAXGARD 700 (benzophenone-12) is an ultraviolet light (UV) stabilizer which provides good compatibility with numerous polymers (including PVC, polypropylene and polyethylene) and inexpensively guards against yellowing. At certain concentrations, it conforms to FDA regulations for additives in polyolefins used in some food packaging applications. In addition to plastics, MAXGARD 700 is used to stabilize coatings, adhesives and sealants from the harmful effects of ultraviolet (UV) radiation.

Empirical Formula: C<sub>21</sub>H<sub>26</sub>O<sub>3</sub>
Physical Appearance: Free-flowing Light Yellow Powder
Mass Density: 1.16g/cm3 at 25°C
Melting Range: 47-49°C
Solubility in Water: Nil
Syndicate content