Pipe Systems

As a liquid concentrated atmospheric corrosion inhibitor, after dilution (a 20%-40% solution is preferred), AC-8020 is normally sprayed, but can be brushed or swabbed on any surface exposed to outside or atmospheric conditions.

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

Norox 771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Norox TBPB is a highly efficient source of free radicals at moderate to high temperatures and can be used as a polymerization or co-polymerization initiator to produce polyethylene, polystyrene and polyacrylates.

Norox W-60 works well in any application where high amounts of water are present. Combining fast gel times with moderate cure profiles, it is not recommended for gel coats.

It is an effective medium temperature initiator for the polymerization and/or crosslinking of numerous monomers and resins, including unsaturated polyester and vinyl ester resins.

Norox Pulcat AW can also be used in cobalt promoted resins for ambient temperature cures.

Norox P-20 is an efficient moderate to high temperature initiator for the polymerization of monomers and resins with vinyl unsaturation.

NOROX MEKP-9H is a methyl ethyl ketone peroxide which features a reduced level of hydrogen peroxide compared to Andonox KP - 9 and gives a longer gel time when workshop and resin temperatures increase during warm weather.